BoosterPlug DUCATI Streetfighter V4 (2020 only)

The BoosterPlug is the smarter choice, when you want to improve the rideability on your DUCATI Streetfighter V4 without spending a fortune.

No need to spend a small fortune on complicated devices like the Power Commander + endless Dyno hours, to make your bike run like it should have from the factory.

No complicated mechanical work or programming is required when installing the BoosterPlug. You simply plug it in using the original connectors and you are done.

There is no better way to improve your riding experience:

- Soft and precise throttle control
- Stronger acceleration
- Remove the low speed surging
- Removes the weak idle and stalling issues
- Reduced popping in your aftermarket exhaust

This version of the BoosterPlug covers all versions of the DUCATI Streetfighter V4 from the 2020 model year.

Please note that we can not build a BoosterPlug for the "2021 and newer" model due to new emission regulations. You can see the detailed explanation here.

Note: The 2020 Ducati Streetfighter V4 is using the same temperature sensor for the fuel injection calculations as for the temperature readout in the dashboard. (Most other brands have seperate sensors). This means that your dashboard display will show 20°C / 35°F lower than actual ambient temperature when you install the BoosterPlug. There's no way around this, and it's probably not an issue for most people, but we want you to be informed about it.