The BoosterPlug is accepted world wide, as a brilliant and affordable way to transform your Royal Enfield 500 Classic from ”OK” to ”Absolutely Marvelous”.
With the BoosterPlug you will have a better tuning solution than the complicated and expensive Power Commander that is almost impossible to set up correctly.
No complicated mechanical work or programming is required when installing the BoosterPlug tuning module. You simply plug it in using the original connectors and you are done. No additional mods required.
Release the full potential in your motorcycle:
- Much better and softer throttle response
- Stronger acceleration
- Say goodbye to the low speed surge issue
- Stronger and more reliable Idle
- Little to no popping in your aftermarket exhaust
IMPORTANT: We have seen that Royal Enfield are selling the 500 Classic with an older generation fuel injection system in some countries outside Europe. The older fuel injection system have no AIT sensor so you can not use the BoosterPlug tuning mod on these bikes.
Please download the installation instructions and check if your bike have an AIT sensor on the inner side of the air filter box - before making a purchase. (The AIT sensor can also be seen in the last of the product pictures on this page)
General Installation Instructions
Bike Specific Installation Instructions
